服装主观热感觉的统计分析

本文用多因子方差分析模型和多重比较分析了服装穿着时的主观热感觉与服装品种、环境条件、穿着者的活动状态与籍贯之间的关系。通过主成分回归建立了用生理指标预测主观热感觉的模型，从而得出一种定量地评价服装属性的方法。     

Intrinsic thermal stability and quenching recovery of thin-film superconductors with thermal boundary resistance

The stability behaviour of a thin-film superconductor under a localized release of thermal disturbance is investigated. Two-dimensional conjugate film/substrate conduction equation with anisotropic thermal conductivity of the film, and Joule heat are employed to investigate effects of substrate and thermal properties on the intrinsic stability and quenching recovery. To consider the thermal boundary resistance between film and substrate, an interfacial-layer model (ILM) with very low diffusivity and an acoustic mismatch model (AMM) are employed. Results show that the thermal boundary resistance influences strongly the intrinsic stability. Thermal boundary resistance increases intrinsic stability if the thermal conductivity of the substrate or the disturbance energy is large. Higher Biot numbers and thermal conductivity ratios of film to substrate in longitudinal direction influence stability favorably. We demonstrate also that operation of a film/substrate system, such as YBCO/MgO, is either intrinsically stable or irrecoverably unstable.The authors wish to express their sincere appreciation to Dr. R. C. Chen for his invaluable advice and suggestions during the course of this paper. This research was supported by the National Science Council of the R. O. C. through grant NSC 83-0401-E-009-006. The computations were performed on the IBM ES/9000 at the National Center For High-Performance Computing.     

自由电子激光的医学应用

自由电子激光这种新型光源非常适合于医学应用。通过对医用自由电子激光器的简要介绍,探讨了自由电子激光与人体组织的相互作用及其在医学上的应用前景。     

On the Solvability of the Multidimensional Version of the First Darboux Problem for a Model Second-Order Degenerating Hyperbolic Equation

A multidimensional version of the first Darboux problem is considered for a model second-order degenerating hyperbolic equation. Using the technique of functional spaces with a negative norm, the correct formulation of this problem in the Sobolev weighted space is proved.     

A New Method for Rotation and Brightness Invariant Pattern Recognition Based on Modified Multiple Circular Harmonic Expansions

A new method for rotation and brightness invariant pattern recognition was proposed by applying multiple circular harmonic expansions to the joint transform correlator. The amplitudes of the multiple orders of circular harmonic expansions made from a detecting image were synthetically modified to respond to the same auto-correlation peaks. These modified circular harmonic expansions were arranged in the input plane as reference patterns together with an arbitrary target pattern, and the correlation signals between them were calculated in the subtracted joint transform correlator. The fraction of the correlation-peak intensities between the target and the references were extracted as a new discrimination parameter. This new parameter performs pattern recognition under rotation and brightness invariance with good discriminability. Its high discriminability has been proved in computer simulations using the face image patterns of many individuals.     

负电子亲和势GaAs光电阴极中的三光子激发和发射的理论研究

将三阶微扰理论应用于单晶GaAs半导体,结合与实际相接近的能带结构,得到了GaAs中三光子吸收系数的解析式表达式,在考虑了激发电子的逃逸过程的情况下,进而推导了负电子亲和势GaAs光电阴极中三光子光电发射的发射系数的解析表达式.两表达式得到的理论数值分别与用ns量级脉宽、2.06μm波长的激光测得的GaAs中三光子吸收系数和GaAs(Cs,O)光电阴极中三光子发射系数的实验值相比较,吻合较好.     

有机薄膜器件负电阻特性的影响因素

研究了影响有机染料掺杂聚合物薄膜器件负电阻特性的因素，为探索有机负电阻的机理提供实验依据。实验中制备了多种有机染料掺杂聚合物薄膜器件，研究了有机小分子染料、聚合物基体、薄膜组成及厚度、ITO和聚苯胺阳极等对有机染料掺杂聚合物薄膜器件负电阻特性的影响。在室温、大气环境下，所制备的多种有机染料掺杂聚合物器件在所加电压为3～4V时，观察到明显的负电阻特性，电流峰谷比最大约为8。负电阻现象及峰谷比的大小受膜厚和器件的结构、制备工艺等影响。提出用负电阻和二极管并联组成的等效电路模型解释影响负电阻特性的因素，认为负电阻特性与载流子的不平衡注入有关。在此基础上设计、合成了主链含唔二唑电子传输基团的可溶性聚对苯撑乙烯衍生物，该聚合物兼具空穴和电子传输功能，在空气中具有较稳定的N型负电阻特性。进一步控制相关材料和工艺条件，有可能得到易于控制的负阻效应，开发出新型的有机负电阻器件。     

Ageing of wet-synthesized oxide powders

Wet chemical synthesis of precursor oxide ceramics is a method to obtain small particulate powders. Such powders are far more prone to ageing in air than more traditional precursors. Thermogravimetric analysis is used to highlight the species responsible for the ageing of ceramic precursors. Indeed water and carbon dioxide are observed to evolve from aged powders. Ceramics obtained from aged precursors can reach a very low final density with respect to the theoretical value. A large degree of the original sintering properties can be recovered after washing the aged powders with ethanol in a basic medium.     

Graphitic nanofillers in PMMA nanocomposites—An investigation of particle size and dispersion and their influence on nanocomposite properties

Mechanical, thermal, and electrical properties of graphite/PMMA composites have been evaluated as functions of particle size and dispersion of the graphitic nanofiller components via the use of three different graphitic nanofillers: “as received graphite” (ARG), “expanded graphite,” (EG) and “graphite nanoplatelets” (GNPs) EG, a graphitic materials with much lower density than ARG, was prepared from ARG flakes via an acid intercalation and thermal expansion. Subsequent sonication of EG in a liquid yielded GNPs as thin stacks of graphitic platelets with thicknesses of ～10 nm. Solution‐based processing was used to prepare PMMA composites with these three fillers. Dynamic mechanical analysis, thermal analysis, and electrical impedance measurements were carried out on the resulting composites, demonstrating that reduced particle size, high surface area, and increased surface roughness can significantly alter the graphite/polymer interface and enhance the mechanical, thermal, and electrical properties of the polymer matrix. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2097–2112, 2007